
Elk Grove Repiping: What to Expect During a Repipe
A repipe sounds bigger than it is. Most Elk Grove homes are done in one to three working days, and you can stay home the whole time. This guide from Elk Grove Repiping walks through what happens before, during, and after, so nothing catches you off guard.
Monday to Saturday, 7:00 AM to 7:00 PM
Get a Free Repipe Quote
Last updated: 2026-11-19
Before the job: the walk-through
We start with a visit. We look at the pipe we can see, check your water pressure, find the main shutoff, and look in the attic or crawlspace to plan the route. We count fixtures and note anything that will slow the job down, like a tight attic or tile walls.
Then you get a written price that lists the pipe, the fixtures, the permit, and the patching. Once you OK it, we file the permit and set a start date.
How to get your house ready
- Clear the area under kitchen and bathroom sinks.
- Move things away from the water heater and garage walls.
- Clear a path to the attic access, often a hallway or closet ceiling.
- Move small furniture and wall hangings away from walls that share plumbing.
- Put away breakables near work areas.
- Plan for pets. Doors will be opening and closing.
We cover floors and large furniture ourselves. You just need to clear what's easy to move.
Day by day
| Day | What happens | Your water |
|---|---|---|
| Day 1 | Protect floors, make access openings, start running new lines through the attic | On most of the day, off for short stretches |
| Day 2 | Finish running lines, connect fixtures, connect the water heater, pressure test | Off for longer blocks while we tie in |
| Day 3 | Finish connections, flush lines, clean up, get ready for inspection | Back on by the end of the day |
| After inspection | Patch and texture drywall openings | On |
A small single-story house may be done in a day or two. A big two-story house with four bathrooms may take three or more. We'll tell you the plan at the walk-through.
Will you have water?
For most of the job, yes. The water goes off when we connect new lines to fixtures and to the main. We tell you ahead of time when it will be off and roughly how long. Most nights you'll have water to shower and flush.
If the job runs overnight with the water off, we'll tell you in advance so you can plan.
How much of the house gets opened up?
Less than most people think. In Elk Grove slab homes, most of the new pipe runs through the attic. We make small openings where lines drop into walls to reach each fixture, usually behind or near sinks, tubs, toilets, and the washer. The openings are sized to do the work, not bigger.
Tile walls, cabinets, and built-ins get extra care. We plan around them when we can.
The inspection
Once the pipe is in and tested, the city or county inspector comes out. In Elk Grove, it's the city's Building Safety and Inspection Division. The inspector checks the pipe, supports, connections, and test before walls close. We schedule it and meet them. You don't need to be home if someone can let us in.
Drywall patching
After the inspection passes, we patch every opening. We cut in a piece of drywall, tape, mud, and match your wall texture as close as we can. We leave the patches ready for paint. Some customers paint themselves. Others have a painter come in after.
Related services
What to expect FAQs
Do I need to move out during a repipe?
No. Most people stay home. The water is off for blocks of time, not for days.
Will it be loud?
There's some noise from cutting and drilling, mostly during the day. It's quieter once the openings are made.
Will there be dust?
Some, from drywall cuts. We cover floors and furniture and clean up each day.
Do I need to be home during the job?
Someone needs to let us in each morning. You don't have to stay the whole time.
How soon after the inspection do you patch?
Usually right away or the next working day.
Will I need to repaint?
The patches are left ready for paint. Most homeowners touch up the paint after we're done.