Skip to main content
New copper supply lines with clean soldered joints running along wood framing inside an open wall.

Elk Grove Repiping: Copper Repiping in Elk Grove, CA

Elk Grove Repiping does copper repiping in Elk Grove, CA, for homeowners who want metal water lines. We take out the old pipe and install new Type L or Type M copper to every fixture, with new shutoff valves and a full pressure test. When the inspector signs off, we patch the walls.

Monday to Saturday, 7:00 AM to 7:00 PM

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

Why do some people still choose copper?

Copper has been used for water lines for a long time, and plenty of homeowners trust it. It's rigid, it handles heat well, and it doesn't break down in sunlight. Some people just want metal pipe in their walls, and that's a good enough reason.

  • It's a proven material with a long history in homes.
  • It can be used in exposed spots and sunny runs where PEX can't.
  • It holds its shape, so runs stay neat and straight.
  • Some buyers and inspectors like seeing copper on a resale.

Type L or Type M?

The difference is wall thickness.

Copper pipe types for home repipes
Type LType M
Wall thicknessThickerThinner
PriceHigherLower
Common useMain lines, long life, harder waterInterior branch lines in many homes
Color code on pipeBlue printingRed printing

Type L costs more and gives you more metal to wear through. Type M is lighter and was used in a lot of homes around here. We'll walk you through both and give you a price for each if you want to compare.

Why does copper cost more than PEX?

Two reasons: material and labor. Copper itself costs more per foot. And because it's rigid, every turn needs a fitting, and every fitting gets cleaned, fluxed, and soldered by hand. A copper repipe on the same house usually takes more hours than PEX.

We also need bigger openings in some spots to fit straight pipe and make the joints. That can mean a bit more drywall patching. If copper is what you want, we'll plan the route to keep that down.

Why did my old copper start leaking?

Copper usually fails from the inside out. Over many years, water wears at the inside of the pipe until a tiny hole opens up. That's a pinhole leak. Once a few show up, more tend to follow, because the whole system is the same age.

What speeds it up varies: water chemistry, high water velocity, high pressure, bad grounding, or poor install work like leftover flux. Elk Grove's water is soft on average, but water from some wells runs harder. Either way, if your copper is 20 or 30 years old and leaking in more than one place, replacing it usually beats patching one leak at a time. If you're comparing materials, read PEX vs. copper.

Copper or PEX for an Elk Grove home?

Most of our customers end up choosing PEX because of price and fewer wall openings. But copper is a solid choice, and we install both. If you're replacing failing copper with new copper, ask about Type L for the extra wall thickness. If you're replacing polybutylene or Kitec, either material works.

Do you patch the drywall after a copper repipe?

Yes. Every opening gets patched and textured after the inspection, and we leave it ready for paint. It's included in the price.

Related services

Areas we serve

Copper repiping FAQs

Is copper better than PEX?

Not better, just different. Copper is rigid metal that costs more. PEX is flexible plastic that costs less to install. Both are approved and both last when installed right.

Will new copper get pinhole leaks too?

It can, eventually. New copper starts fresh, and Type L gives you more wall thickness. Good install work and normal water pressure help it last.

Can you mix copper and PEX?

Yes. We sometimes use copper at stub-outs or outdoor runs and PEX inside the walls. We'll explain where each goes.

How long does a copper repipe take?

Usually a day or so longer than PEX on the same house, because of the soldered joints. Most homes are done in two to four days.

Do you use lead-free solder?

Yes. Lead-free solder is required for drinking water lines, and that's what we use.

Can you repair just one copper leak?

Yes. If the rest of the pipe is in good shape, a spot repair is fine. If leaks keep showing up, we'll talk about a partial repipe or a full one.

Want copper in your walls?

Call or send a few details. We'll price Type L and Type M so you can compare.

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.