
Elk Grove Repiping: Kitec Pipe Replacement in Elk Grove, CA
Elk Grove Repiping does Kitec pipe replacement in Elk Grove, CA. Kitec is the bright orange and blue water pipe with brass fittings that went into some homes built from the mid 1990s into the late 2000s. The fittings corrode from the inside and can fail without warning. We remove the Kitec and run new PEX or copper to every fixture.
Monday to Saturday, 7:00 AM to 7:00 PM
Get a Free Repipe Quote
What is Kitec pipe?
Kitec is a brand of water supply pipe and brass fittings made by IPEX. The pipe has a thin layer of aluminum sandwiched between two layers of plastic. Hot lines are orange. Cold lines are blue. The brass fittings are stamped "Kitec" or "KTC."
California's home inspector association says Kitec brass fittings were produced from 1995 until 2005, when IPEX recalled them because of failures. It advises checking the water piping in homes built from 1995 to 2007 or 2008.
The product was also sold under other names, including PlumbBetter, IPEX AQUA, WarmRite, and Kitec XPA.
Why does Kitec fail?
The main problem is the fittings. They're made of a brass with a lot of zinc in it. Over time, water pulls the zinc out of the brass, a process called dezincification. What's left is weak and porous. White or green crust builds up inside and outside the fitting. Flow drops, and eventually the fitting can crack or blow apart.
The pipe can have problems too. Hot water and high pressure can wear on it, and you may see blisters or dark spots on the outside of the orange hot lines.
Do Elk Grove homes have Kitec?
Some do. Kitec was sold during the same years Elk Grove was building fast. Sacramento County planners laid out the East Franklin area before the city incorporated in 2000, and a big share of it was built within a few years after that. Many homes from that era have PEX or copper, not Kitec. But we do find Kitec in Elk Grove and nearby homes from the late 1990s and 2000s, so it's worth checking if your house was built then.
How can you tell if you have Kitec?
- Look at the pipe at the water heater, under sinks, and at the washer box.
- Bright orange and bright blue pipe is the first clue.
- Look for "Kitec" or "IPEX" printed on the pipe, and "Kitec" or "KTC" stamped on the brass fittings.
- Check the electrical panel. Some Kitec installs have a warning tag there, since the pipe's aluminum layer could carry current.
- Check the build year. Homes from 1995 to about 2008 are the ones to look at.
Orange and blue alone doesn't mean Kitec. Some newer PEX brands use those colors too. The printing and the fittings are what settle it. If you're not sure, send us a photo or have us look.
Can you replace just the fittings?
Some people try. It's hard to reach every fitting without opening a lot of walls, and the pipe is the same age as the fittings. Most of the time, a full replacement makes more sense than chasing fittings one at a time.
What does a Kitec replacement involve?
It's a whole house repipe. We run new PEX or copper through the attic and down to each fixture, put in new shutoff valves, and cap off or remove the old Kitec. Then we pressure test the system and get the permit signed off. See PEX repiping for how we lay out the new lines.
If you're seeing leaks now, start with leak detection so we can find them before they spread.
Do you patch the drywall after Kitec replacement?
Yes. Every access opening gets patched and textured after the inspection. Patching is included in our price.
Related services
Areas we serve
Kitec pipe FAQs
Is there still a Kitec settlement?
The class action settlement for Kitec has expired, so homeowners now pay for replacement on their own.
Is Kitec the same as PEX?
Kitec is a PEX-aluminum-PEX pipe with brass fittings. Modern PEX is solid cross-linked tubing with different fittings. They're not the same product.
Is Kitec dangerous?
It's not a health hazard in normal use. The risk is leaks and bursts that can cause water damage.
Will a home inspector flag Kitec?
Many do. It often comes up when a house is being sold.
Does homeowners insurance cover Kitec?
Some insurers ask about it or limit coverage. Check with your agent before you assume anything.
How long does a Kitec repipe take?
Most homes take one to three days, plus drywall patching after the inspection.