Skip to main content
A technician holding a thermal camera aimed at a living room wall, with a cooler streak showing on the screen.

Elk Grove Repiping: Leak Detection in Elk Grove, CA

Elk Grove Repiping does leak detection in Elk Grove, CA. If your water bill jumped, your meter won't stop moving, or you hear water when nothing is on, there's a leak somewhere. We track it down in the wall, the slab, or the yard before anyone cuts into anything, so the repair is small and in the right spot.

Monday to Saturday, 7:00 AM to 7:00 PM

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

How do you know you have a hidden leak?

  • Your water bill is higher than usual and your habits haven't changed.
  • The meter dial or low-flow indicator moves with every fixture off.
  • You hear running or hissing water in a wall or under the floor.
  • There's a warm spot on the floor.
  • Paint is bubbling, drywall is soft, or baseboards are swelling.
  • There's a musty smell in one room that won't go away.
  • A patch of lawn stays green or soggy when the rest is dry.

How to check your water meter

You can do this one yourself before you call.

  1. Turn off every faucet, shower, toilet, washer, dishwasher, and irrigation zone.
  2. Find your water meter. In most of Elk Grove, it's in a box near the curb or sidewalk.
  3. Open the lid and look at the dial. Many meters have a small triangle or star that spins with even a little flow.
  4. Watch it for a few minutes. If it moves, water is going somewhere.
  5. If you can, close the main shutoff at the house and look again. If the meter stops, the leak is inside the house. If it keeps going, the leak is likely in the line between the meter and the house.

A running toilet is the most common cause of a moving meter, so check those first. If the toilets are fine, call us.

How do we find the leak?

We use a few methods together. Which ones depend on where we think the leak is.

Leak detection methods we use
MethodWhat it does
Line isolationWe shut off sections of pipe to narrow down which line is leaking.
Pressure testingWe pressurize a line and watch for a drop. A drop means a leak.
Acoustic listeningSensitive microphones pick up the sound of water escaping, even through concrete.
Thermal imagingA thermal camera shows warm or cool streaks from hot or cold water leaks.
Moisture metersWe check drywall, baseboards, and flooring for moisture.

The goal is a mark on the wall, floor, or ground close to the leak. That way the repair opening is small.

Where do Elk Grove leaks usually turn up?

In Elk Grove homes, we see a lot of leaks in three places. The first is under the slab, especially hot lines near the kitchen or a bathroom. The second is inside walls and ceilings, often at fittings on polybutylene, Kitec, or older copper. The third is the yard, on the main line between the meter and the house.

Once we know where it is, we can plan the fix: slab leak repair, a partial repipe, or water line replacement.

What happens after the leak is found?

We show you where it is and explain your options in plain words. If it's a single fitting, a spot repair may be all you need. If the leak is one of several, or the pipe is polybutylene or Kitec, we'll talk about whether a repipe makes more sense. You decide. We don't start repairs without your OK.

If your insurance company needs a written report, we'll give you one that describes what we found.

Do you patch the drywall after a leak repair?

Yes. If we open a wall or ceiling to fix a leak, we patch and texture it when the repair is done and inspected.

Related services

Areas we serve

Leak detection FAQs

How long does leak detection take?

Most homes take one to three hours. Leaks in large slabs or long yard lines can take longer.

Will you have to cut holes to find the leak?

Not to find it. We use listening gear, pressure tests, and cameras first. Openings come later, only where the repair needs one.

Can you find a leak under concrete?

Yes. Acoustic gear and line isolation work well on slab leaks.

Is a moving meter always a leak?

Almost always, if every fixture is off. A running toilet or an irrigation valve that won't close are common causes.

Can you find leaks in the yard?

Yes. We trace the main line from the meter to the house and listen along its length.

Do you fix the leak too?

Yes. Once we find it, we can repair it, reroute it, or replace the line, depending on what makes sense.

Meter still spinning?

Call us. We'll find the leak and tell you how to fix it.

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.